KingTech Turbines Luxembourg

Jean-Marc Berg, KingTech Turbines Luxembourg | Aerospace Defense Review | Top RC Turbine Engines and Aviation Hobby Equipment Solutions in EuropeJean-Marc Berg, Founder and Managing Director
In a turbine-powered aircraft, the engine gets most of the attention. Yet many in-flight problems start further upstream, in the fuel system. A single air bubble, a clogged line or a pickup that loses contact with the fuel during a manoeuvre can be enough to cause a flame-out. At KingTech Luxembourg / JMB-Jets, based in Rédange-sur-Attert, Luxembourg, we supply KingTech turbines and complete jet setups, and we design our own JMB-Jets fuel system components. Our goal is simple: deliver a steady, clean and bubble-free fuel supply to the engine, flight after flight.

The components below were developed for demanding RC turbine installations. Because they solve the same problems that unmanned aircraft face, they are also increasingly recommended for UAV applications.

Soft Tanks — Lightweight, Flexible Fuel Tanks

JMB-Jets Soft Tanks are flexible fuel tanks designed for high-flow fuel delivery. Their bladder contracts as fuel is consumed, allowing the system to operate as a closed circuit without an additional vent. This design helps prevent air from entering the fuel system and promotes a steady fuel supply. Their lightweight construction is also an advantage in installations where every gram counts, and their flexibility makes them easier to fit into tight or irregular spaces inside a fuselage.

UAT — High-Flow Fuel Delivery with Air Bubble Protection

JMB-Jets UATs (Ultimate Air Traps) are designed to stop air bubbles from travelling through the fuel system to the engine. Their high-flow design meets the demands of fuel-hungry turbines. Available in capacities from 100 to 550 ml, they allow each installation to be tailored to the model's requirements. The 550 ml version is designed for turbines producing up to 1,000 N of thrust. In UAVs powered by thermal engines, the same principle helps prevent vapour lock, a common cause of power loss.

Tank Fitting Set — Connecting Your Fuel Tank

The JMB-Jets Tank Fitting Set brings together the components needed to equip an opening in the tank wall and connect the fuel lines. The set includes mounting components, fittings and seals to secure and seal the assembly. Designed for high-flow fuel systems, it provides a reliable interface between the tank and the rest of the installation. Its blue finish matches the other components in the range, giving a clean and consistent look to the whole system.

  • A turbine is only as reliable as the fuel that reaches it. Every JMB-Jets component is designed to deliver a steady, bubble-free supply, whether the engine powers a jet model or an unmanned aircraft.


High-Flow Tank Clunk — Weighted Brass Clunk with Fuel Strainer

The JMB-Jets High-Flow Tank Clunk combines a heavy brass body with an integrated fuel strainer. Its weight keeps the pickup immersed in the fuel as the aircraft changes attitude, supporting a steady supply even during aerobatic manoeuvres. The strainer retains particles before they enter the fuel line, protecting pumps and engines. This makes the clunk a practical choice for demanding turbine installations.

One System, Not Just Parts

Each of these components does one job well, but their real value appears when they work together. Fuel leaves the soft tank through the weighted clunk and its strainer, passes through the tank fittings, and reaches the UAT, where any remaining air is separated before it can reach the engine. The result is a closed, high-flow circuit that keeps the engine fed in every flight attitude.

“A turbine is only as reliable as the fuel that reaches it. Every JMB-Jets component is designed to deliver a steady, bubble-free supply, whether the engine powers a jet model or an unmanned aircraft,” says Jean-Marc Berg.

From the Hobby to Professional UAV Applications

The RC jet community has always pushed equipment to its limits, with high fuel consumption, hard manoeuvres and tight installation spaces. The solutions that work there are a natural fit for UAV builders, who need the same reliability and low weight. At KingTech Luxembourg / JMB-Jets, we continue to develop our fuel system range with both worlds in mind, and we support our customers in choosing and installing the right components for their aircraft.

Deep Dive

RC Turbine Buying without Assembly Friction

A model jet purchase can stall when the engine, fuel path, airframe and accessories arrive from separate sources and leave the buyer to solve fit and support issues on personal time. The hobby may look discretionary, yet serious RC turbine flying depends on parts that must work together under tight tolerances. For model-aviation enthusiasts, procurement is less about finding another catalog than reducing the number of gaps between selection and flight. Product range matters because fragmentation creates hidden costs. A turbine engine is only one part of the purchase. Fuel delivery, air trap tanks, tank hardware, batteries, electronics and airframes shape whether the installation becomes manageable or turns into repeated troubleshooting. Buyers should favor suppliers that understand the aircraft as a working assembly rather than a shelf of unrelated parts. Breadth alone is not enough. The practical test is whether the product mix shortens decision time while reducing compatibility uncertainty. Time pressure has also changed the model aircraft market. Fewer buyers can spend months building from raw components, and many still want the discipline of a serious turbine aircraft rather than a toy-grade shortcut. Partially assembled PNP and ARF-style aircraft address that shift only when the remaining work is well documented and backed by knowledgeable advice. Preassembly is not merely convenience. It is a way to protect buyer time without removing the work required to complete the aircraft. Quality control carries a different meaning in turbine hobby equipment than it does in ordinary leisure products. Small defects can become expensive fast, especially in fuel systems and fittings. Consistent manufacturing practices and feedback-driven refinement give buyers more confidence before a model reaches the runway. The same logic applies to repair support. Slow answers can ground aircraft for weeks, while a supplier that can diagnose issues quickly keeps equipment in use and reduces frustration after the sale. The UAV crossover adds another pressure point. Fuel system components, once judged mainly by hobby standards, are now being reviewed by buyers with more formal expectations around repeatability and service response. Stock availability matters, especially when a grounded aircraft waits on a modest fitting. Such demand does not make hobby equipment industrial by default, but it raises the bar for documentation, supply continuity, repair pathways and workmanship. A supplier serving both experienced hobbyists and UAV builders needs the product depth to handle technical questions without turning every purchase into a custom research project. KingTech Turbines Luxembourg fits that buying logic as a single-source option for RC turbine engines and aviation hobby equipment. It offers KingTech turbines from Taiwan, turboprops, PNP model aircraft, UAT fuel systems, soft tanks, clunks, tank fittings and related accessories. The company also manufactures and assembles many fuel-system products in Luxembourg, supports European and UK customers and places quick repair service alongside product advice. For buyers who want one source for turbine propulsion and practical post-sale help around fuel-path hardware, it offers a streamlined route from product selection to flight readiness. ...Read more